Brian Sims
Editor

PTZ models added to Hanwha Techwin’s Wisenet Q Series

HANWHA TECHWIN has further strengthened its Wisenet Q Series with the introduction of four new PTZ cameras. The new indoor and outdoor 2 MP PTZs are equipped with a host of innovative features including a Focus Save function. The latter can be applied to 32 pre-defined areas and ensures that the cameras are able to rapidly focus when moved to a specific position.

Precise PTZ control is achievable with the assistance of ‘click and drag’ which enables operators to use a mouse to rapidly move the camera to a new position and ‘click to centre’ which focuses the cameras on a specific area of interest within a field of view. A scroll wheel zoom feature also allows operators to quickly zoom in to see close-up detail of any suspicious activity or incident.

In addition, up to 12 customised direction indicators – such as ‘to the car park’ or ‘main exit’ – may be superimposed over a field of view to help operators, who may not be familiar with the location they are monitoring, ultimately decide where to point the cameras.

The outdoor models boast enhanced protection from rain and snow. This is because, unlike conventional PTZ cameras which can require up to five separate cables, they only need a single RJ45 cable to operate.

In addition to minimising the possibility of water damage, this also makes them quick and easy to install, as does a ‘match three points and twist’-style installation feature.

Additional key features

The ability to ‘hand over’ to cameras covering adjacent areas means that system operators can continue to observe people or vehicles as the latter move out of a given PTZ camera’s field of view.

Digital Image Stabilisation with built-in Gyro sensors comes into effect when a camera’s disturbed by wind or vibrations. This delivers more stable images, while at the same time compensating for roller shutter effects.

A Micro SD slot allows video or data to be stored at the edge should there be disruption to the network. Up to 256 GB of video, which might have been potentially lost, can be retrieved when the network connection is restored.

Power over Ethernet (PoE+) negates the requirement for installing a power supply and separate cabling for the camera.

When connected to the QNP-6250H and QNP-6320H, an optional Wisenet SPM-4210 Network I/O box provides the choice of four alarm inputs/outputs or one audio port and two alarm inputs/outputs.

The new cameras are as follows:

*QNP-6320: 32 x zoom indoor PTZ

*QNP-6250: 25 x zoom indoor PTZ

*QNP-6320H: 32 x zoom outdoor PTZ

*QNP-6250H: 32 x zoom outdoor PTZ

In addition to these new PTZs, Hanwha Techwin has announced that it also intends to introduce two further Wisenet Q Series PTZs in due course. Both will feature built-in IR LEDs which will illuminate objects located up to 100 metres from the camera.

*Further information is available online at www.hanwha-security.eu

Company Info

Hanwha Techwin Europe Ltd

Heriot Road
Chertsey
KT16 9DT
UNITED KINGDOM

0044 1932 578 100

htesecurity@hanwha.com

www.hanwha-security.eu

Related Topics

Login / Sign up